Inverter migomat 230A MIG / MAG / MMA / LIFT-TIG PM-IMGS-230L SYNERGY
 
The Powermat PM-IMGS-230L SYNERGY semi-automatic welding machine has a very wide range of use. It enables efficient welding of various types of material groups in a wide range of material thicknesses. The applied IGBTs have a beneficial effect on lower electricity consumption, greater resistance to disturbances and voltage drops, and good arc characteristics.
 
The control panel with the description of the functions in Polish is easy to use and the operator has quick access to all functions. This has a positive effect on ergonomics and work efficiency in the plant.
 
The device has a synergic welding function, thanks to which it is possible to obtain the highest quality weld when welding all weldable materials - especially those made of stainless steel and aluminum.
 
The electronics of the device are based on IGBT transistors combining the advantages of two types of transistors, the ease of control of field effect transistors, high breakdown voltage and the switching speed of bipolar transistors. The welding current is very stable, which guarantees a perfect weld. Thanks to the IGBT technology, the device is lighter and more economical in energy consumption.
 
High performance and effective cooling
Thanks to the use of IGBT technology, the efficiency of the device is as high as 60%.
 
Built-in automatic functions to make your work easier

    • HOT START, commonly known as hot start, enables the welding current to be temporarily increased above the value set by the welder. HOT START works when the arc is struck and is designed to prevent the electrode from sticking to the material. It is a great help when lighting the electrode.
    • ANTI STICK cuts / minimizes the welding voltage and current in the event of a short-circuit between the electrode and the material being welded. ANTI STICK allows the welder to detach the electrode more easily.
    • ARC FORCE stabilizes the arch regardless of its length. By decreasing the function values, it gives a soft arc and a smaller penetration depth, while increasing the function values ​​causes deeper penetration and the possibility of short arc welding. At the highest value for the ARC FORCE function, it is possible to "push the electrode into the molten metal pool and burn through the material. This model has automatic ARC FORCE control.
 
Additional work comfort and advantages are provided by:

    • Synergic MIG mode - a function that allows you to set two and four-latch.
    • Inductance regulation - which allows to reduce the amount of heat introduced into the place of welding. In this way, deformation of the sheet metal and damage to the protective zinc layer can be avoided. This option is useful during braze welding.
    • The function of selecting the type of material to be welded, which in synergic mode will select the appropriate welding parameters to facilitate its performance.
    • BURNBACK adjustment - a function that prevents the electrode wire from sticking to the contact tip by temporarily ejecting the wire after the welding process is finished.
    • Spot welding function - adjustable.
    • VRD function - voltage reduction system, the task of which is to turn off the power supply within a few milliseconds after the end of welding. This function is also responsible for reducing the voltage at the stick electrode to a safe level. Voltage reduction system.
 
Preset options available

    • FeCO2 - synergic program for welding carbon steel with the MAG method in a CO2 shield.
    • FeMIX - synergic program for welding carbon steel with the MAG method in the shield of Ar + CO2 gas mixture.
    • FLUX - program for self-shielding cored wire for carbon steel and low-alloy steel without the use of gas (requires polarity change).
    • SS - stainless steel welding program
The semi-automatic machine, by switching the type of material to be welded, gives the appropriate presets, which can be adjusted manually and removed changes by restoring factory settings.
 
A good wire feed system

The 2-roller feeder enables precise feeding of the welding wire, preventing it from slipping.

Automatic wire feed has been enriched with speed control along with the time of holding the button on the panel.

 
Device mobility

Light construction with a stable aluminum handle allows for easy movement of the entire device.
 
TECHNICAL DATA:

    • model: PM-IMGS-230L
    • power supply: 230V
    • MIG / MAG power consumption: 6.1kVA
    • power consumption TIG / MMA: 5.8kVA
    • welding methods: MIG / MAG / MMA / LIFT-TIG
    • MIG / MAG welding current range: 30 - 230A
    • MMA welding current range: 30 - 205A
    • welding current 100% duty cycle: (MIG / MAG - 178A)
    • welding current 60% duty cycle: (MIG / MAG - 230A)
    • supported wire diameters: 0.6 / 0.8 / 1.0 / [mm]
    • supported electrode diameters: 1.6mm - 4mm
    • welding voltage: 15.5 - 25.5V
    • operating modes: 2T / 4T (with adjustable crater filling parameters)
    • welding inductance adjustment: -10 - 10
    • supported wire spools: max. up to 5 kg
    • welding parameters control: YES
    • insulation class: F.
    • network protection: 25A
    • degree of protection: IP21S
    • dimensions: 48 x 21 x 37.5 cm [length / width / height]
    • net weight: 11.40 kg
 
EQUIPMENT:

    • mass holder (-): 200mm
    • MMA electrode holder (+): 210cm
    • EURO MIG / MAG grip: 400cm
    • contact tips: 2x 0.8 / 1.0 [mm]
    • reel (double-sided) supporting wire: 0.8mm and 1.0mm; type U
    • user manual PL
    • universal key